Influence of the austenitic stainless steel microstructure on the void swelling under ion irradiation
1 DEN-Service de Recherches Métallurgiques Appliquées, CEA, Université Paris-Saclay, 91191 Gif-sur-Yvette, France
2 DEN-Service d’Études des Matériaux Irradiés, CEA, Université Paris-Saclay, 91191 Gif-sur-Yvette, France
3 Unité Matériaux et Transformations (UMET), UMR CNRS 8207, Université Lille 1, 59655 Villeneuve d’Ascq, France
⁎ e-mail: email@example.com
Received in final form: 16 November 2015
Accepted: 20 May 2016
Published online: 17 June 2016
To understand the role of different metallurgical parameters on the void formation mechanisms, various austenitic stainless steels were elaborated and irradiated with heavy ions. Two alloys, in several metallurgical conditions (15Cr/15Ni–Ti and 15Cr/25Ni–Ti), were irradiated in the JANNUS-Saclay facility at 600 °C with 2 MeV Fe2+ ions up to 150 dpa. Resulting microstructures were observed by Transmission Electron Microscopy (TEM). Different effects on void swelling are highlighted. Only the pre-aged samples, which were consequently solute and especially titanium depleted, show cavities. The nickel-enriched matrix shows more voids with a smaller size. Finally, the presence of nano-precipitates combined with a dense dislocation network decreases strongly the number of cavities.
© B. Rouxel et al., published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.