https://doi.org/10.1051/epjn/2025074
Review Article
Thermal properties of reinforced concrete for containment pressurisation studies: state of the art and proposals for best estimate and conservative values
1
Institut de Radioprotection et Sûreté Nucléaire (IRSN), PSN-RES/SAM/BEAM, Fontenay-aux-Roses, F-92260, France
2
Since 2025, Autorité de sûreté Nucléaire et Radioprotection (ASNR), PSN-RES/SAM/BEAM, Fontenay-aux-Roses, F-92260, France
* e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Received:
11
December
2024
Received in final form:
16
October
2025
Accepted:
4
November
2025
Published online: 12 January 2026
In case of loss of coolant accident or severe accident in a nuclear pressurised water reactor, the containment pressure must remain below the design pressure to prevent radioactive releases. The evolution of containment pressure can be estimated by computer codes such ASTEC or MAAP. However, especially for severe accident, the pressurisation kinetics during the first 24 hours is very sensitive to the thermal properties of the containment concrete, which stores most of the decay heat. A wide range of thermal properties (thermal conductivity, specific heat and density) of concrete and reinforced concrete can be found in the literature, depending on the concrete temperature, composition and relative humidity. This paper presents a review of available thermal properties for concrete and reinforced concrete and makes some proposals for best estimate and conservative properties to calculate the evolution of the containment pressure during the first 24 hours after the accident initiator.
© J.-J. Ingremeau, Published by EDP Sciences, 2026
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
