https://doi.org/10.1051/epjn/2025046
Regular Article
GREAPMC: development status, capabilities, and future developments
1
Department of Nuclear Engineering, Ulsan National Institute of Science and Technology, 50 UNIST-gil, Ulsan, 44919, Republic of Korea
2
Advanced Nuclear Technology and Services, 406-21, Jonga-ro, Jung-gu, Ulsan, 44429, Republic of Korea
* e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Received:
11
June
2024
Received in final form:
11
July
2025
Accepted:
4
August
2025
Published online: 16 September 2025
Abstract
This article focuses on the capabilities, performance, and verification of GPU-optimized REActor Physics Monte Carlo (GREAPMC), a multigroup Monte Carlo code, against multigroup simulation on MCS; an in-house, CPU-based, Monte Carlo code. The simulation results for a three-dimensional fuel assembly indicate a superior performance of GREAPMC over the conventional MC codes optimized for CPU with one GPU card equivalent to approximately 13 CPU boards for the hardware employed in this work. The immense potential of GPUs has led to the development of GPU-aware continuous energy capability which is in progress with the target velocity sampling (TVS) part completed. The essence of using GPU for continuous energy MC is quantified by simulating the effect of the number of histories on the execution time for the TVS methods. The results show a remarkable acceleration compared to the CPU. The findings provide a basis for further development in GREAPMC.
© M. R. Ali et al., Published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
